RM 120 Highly Qualified, Multi-Purposeful Repair Mortar
Description: RM 120 is a concrete based repair mortar with an only ingredient. It is polymer and modifiable.
Application Areas: All sorts of Ferro concrete buildings Vertical and horizontal repairs
Features: It is only mixed with water The qualities of mechanics are high. It can be applied with spraying method.
Application: The preparation of the surface: The surface on which the application is done must be clean and purified from all kinds of substances such as dust, oil, dirt and substance that prevents from sticking. The surface must be wetted if it is absorbent.
The preparation of the mortar: For a 25 kg plastic bag, 4,5 – 5 kg water is put into a suitable pot. RM 120 is slowly added to the water by means of a mixer with low speed. It is mixed till it becomes homogeny. (3 – 5 minutes).
The application of mortar: The mortar is scattered by means of the trowel and spatula as in needed thickness. In order to prevent it from drying easily in hot, windy and sunny weather, the surface should be wetted or the system of cure should be applied. The mortar should be used without being waited. (10 – 30 minutes)
Technical Information: Package : a 25 kg barrel, a 1 tone palette Colour : concrete grey Consumption :1,8 – 2 kg./ mm. / m² Density : 1.8 kg / litre of dry powder Storing: In its original package, 6 months in dry conditions (at + 5°C and + 30°C ). Thickness of application: 5 - 20 mm.
|