SZM 200 Mineral Metals Based Concrete Surface Hardeners
Description: It is a mixture of a material which consists of SZM 200 cement, pigment, chemical ingredients, and tough mineral (mineral metal) aggregate and ready powder concrete surface hardeners. It is applied to the floors which are exposed to medium and upper mechanical abrasion.
Application Areas: Floor coverings of houses, industrial and commercial buildings Garages, petrol stations, car parks Places where storage and loading are done Workplaces, factories, shipyards Shops, offices, supermarkets, large stores etc.
Features: It enables the highly resistance of surface abrasion. It decreases the surface’s getting dusty It increases the life-span of surface. Different colours are available (grey, light grey, yellow, red and green) Different colours apart from primary colours are provided forspecial usages. It is quite durable against the bumps and freeze.
Application: After the process of lining and moulding of concrete – the thickness which is at least 8 cm has finished, if there is water on the surface it is taken. Depending on the heat of the atmosphere, the plug of the first 45 minutes is waited. Then SZM 200 is scattered to the surface twice as 5 kg./ m². After chopper, trowel, polish processes have finished, it is finished by applying the cure as 0,2 kg./ m² in advance. Note: In colourful applications 7 kg./ m², and for highly resistance 9 kg./ m² are advised to use.
Technical Information: Package : a 25 kg plastic bag, a 1- tonne palette Colour : concrete grey, light grey, red, yellow and special colours Curing Time:Variable according to the features of concrete and heat of the atmosphere Traffic of Pedestrian : 1 – 2 days Fully Curing Time: 28 days Resistance of Pressure : 650 kg./cm² (first day) Consumption : 4 – 8 kg./m² (on average 5 kg. / m²) Density : 1,8 kg. / litre dry powder Storage : 8 months in its original packages and dry atmosphere (+ 5°C and + 30°C)
|